MICROLINE 8480FB DRIVER

Press LOAD to save your new setting and exit the menu mode. Page 32 Menu SummaryNote The default setting is in bold blue type. Check to be sure that the Align x Pos. To correct for this, change from Auto Gap to a manually set gap. Press LOAD to save your new setting and exit the menu mode. Setting The Printhead Gap The printhead gap is the distance between the printhead and the platen. Note Always print the Function Setting Menu before you reset orchange the settings.

Uploader: Akinodal
Date Added: 2 May 2013
File Size: 11.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49205
Price: Free* [*Free Regsitration Required]

With the printer turned on and on line, press SEL.

Auto Align cannot be used with envelopes. The setting will be maintained until the printer is turned off or until 8840fb receives an I-Prime signal. Your printer comes from the factory set to automatically detect the printhead gap Auto Gap selected for the media being fed in.

This feature automatically aligns single sheets or forms placed on the platform with the platen as they are drawn into the printer.

With the printer turned on and on line, press SEL. If your software spends a long time processing between portions of data it feeds to the printer, choose a longer time interval value to keep your printer from dumping the received data while it is waiting for more.

  GP - 5890 XIII USB DRIVER

Okidata Microline 8480FB Printer Ribbons – 41708209 Cartridges

Available settings are Valid [thedefault] or Invalid. Page 53 Manual feed settings: Print the Menu on Continupus Forms 1. Correcting Repetitive Jams 3. Auto AlignThe printer is set at the factory for Auto Align enabled.

Okidata Microline FB Printer Ribbon and Printer Supplies at

Print SuppressThe default is No. Tilt the display panel forward.

Page 81 Clean the HousingYou should clean the inside of the printer every six months or afterabout hours of operation. The sheet loads in to the print position, automatically aligning 8480f that it microlkne square with the print path. To print envelopes, youmust disable Auto Align see belowthen use the sheet guide 1 toload and align the envelope. Choose where the paper is ejected when you are using manualfeed from the platform: Not Used Valid, Invalid Page 43 Auto Eject Pos.

This manual also for: Certain media, especially media with uneven thickness, may not work well with the Auto Gap feature and could produce unsatisfactory print results.

  DTECH PCI CARD DRIVER

Change it to Valid if your system uses pin 14of the parallel interface to control automatic line feed.

OKI MICROLINE FB USER MANUAL Pdf Download.

On-line [the default] or Offline. Remove paper Remove the jammed paper see page 69 and press SEL. Emulation ModeChoose the printer emulation: To correct for this, change from Auto Gap to a manually set gap. Change to Invalid if the Paper Set Alarm sounds when you try toload preprinted forms with anomalies at the top, such as a largedark area or a cutout.

Page 49 PE Adj. Unpack the ribbon cartridge and remove the lock pieces microlinr. Reset InhibitThe default is No. CutSheet SmoothHelps to correct for paper curl when feeding in a form manuallythrough the platform.

Page 71 Paper Jams: Then reclose the cover. Turn the platen knob forward or backward to bring out the jammed sheet.