INTEL ETHERNET X520 10GBE DUAL PORT KX4-KR MEZZ DRIVER

If you are using more than two adapters, and you want a specific adapter to take over if the primary fails, you must specify a secondary adapter. Page 2 Information in this document is subject to change without notice. Try connecting to a different port on the link partner. MVT Design Considerations In order to activate MVT, you must have at least one Intel adapter or integrated connection in the team, which must be designated as the primary adapter. Could not allocate shared memory necessary for operation. This will ensure that all adapters will function correctly. If the adapter cannot establish link with the link partner using auto-negotiation, you may need to manually configure the adapter and link partner to identical settings to establish link and pass packets.

Uploader: Yozshusida
Date Added: 28 May 2016
File Size: 53.30 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1760
Price: Free* [*Free Regsitration Required]

Page Warning http: Informational Preferred primary adapter has been detected: MVT Design Considerations In order to activate MVT, you x50 have at least one Intel adapter or integrated connection in the team, which must be designated as the primary adapter.

Network Adapters – Intel – Intel(R) Ethernet X520 10GbE Dual Port KX4-KR Mezz Drivers Download

Updating drivers for multiple adapters or ports: Set Up as Responder This ehternet the user to set up the adapter as a responder so a connected system can pirt the network test portion of the diagnostics tests. Interrupt moderation must be used to avoid inter- rupt storms while the driver is processing one interrupt. MAC and VLAN anti-spoofing feature When a malicious driver attempts to send a spoofed packet, it is dropped by the hardware and not transmitted.

  CANON NX410 DRIVER

This feature is enabled and configured by the equipment manufacturer.

Page Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Removing the Drivers You should uninstall the Intel driver if you are tehernet removing all Intel adapters, or if you need to perform a clean installation of new drivers.

Page 84 Building and Installation There are two methods for installing the igbvf driver: If the primary adapter fails, another adapter will take over its duties. Don’t have an account?

VMware Compatibility Guide – I/O Device Search

Please refer to the kx4-kg file prosetcl. This screen describes various properties of the adapter. Page 81 MAC and VLAN anti-spoofing feature When a malicious driver attempts to send a spoofed packet, it is dropped by the hardware and not transmitted.

Building and Installation There are three por for installing the igb driver: A “1” indic- ates a preferred primary adapter, and a “2” indicates a preferred secondary adapter. Upon ter- mination, you will immediately destroy the Software or return all copies of the Software to Intel.

For more information on NAPI, go to: OS Updates Some features require specific versions of an operating system. It is not available on all adapters and network controllers.

Select your language

intfl Page 50 The setting is: System Requirements Length is meters max. Trademarks used in this text: Page Command Line Parameters If the driver is built as a module, the following optional parameters are used by entering them on the command line with the modprobe command using this syntax: You can also use diagnostics to isolate problems during troubleshooting.

  DYNEX DX CR6N1 DRIVER

The RSS parameter has no effect on based adapters unless the FdirMode parameter is sim- ultaneously used to disable Flow Director. Using The Adapter Using the Adapter Testing the Adapter Intel’s diagnostic software lets you test the adapter to see if there are problems with the adapter hardware, the cabling, or the network connection.

Pprt 8 Length is meters max for Category 7. If the value is greater than 0, it will also force the VMDq para- meter to be 1 or more.

Supported Adapters – Server Gigabit

In order to use adapter teaming, you must have at least one Intel gigabit or 10 gigabit server adapter in your system. LLI parameters are not enabled when Legacy interrupts are used. Page 90 SLES release. This information is primarily used for troubleshooting by Customer Support.

Building and Installation There are two methods for installing the igbvf driver: If during this process you are asked for the driver or module name, the name for the Linux Base Driver for the Intel Gigabit Fam- ily of Adapters is ee.