Check the screen on the right and click Close. Check paper stack height guides. Adjust the paper-length guide by squeezing the adjustment latch and sliding the guides to the size of the paper being used. To test the document feeder and the copy function, do the following:. Open Tray 4, remove the orange shipping tape and the cardboard insert, and then close the tray. On the printer control panel, touch the Network button.

Uploader: Nikomuro
Date Added: 20 December 2015
File Size: 46.57 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29043
Price: Free* [*Free Regsitration Required]

HP recommends recycling packing materials whenever possible. To verify caxport your printer prints, do the following:. For software installation instructions, click the link for your computer operating system and type of connection.

Select the LPR Printing radio button, and then specify the queue name up to 32 characters.

Configuring Printer Port

Make sure that the printer is turned on. Verify that the contents match this illustration. If the printer is connected to a network, find the IP address on the Jetdirect page. If not, you must manually configure the IP address.

Touch the Help button on the printer control panel to access Fazport topics. If the IP address is 0. Make sure that the stack of paper fits within the tray and is no higher than the top of the guides.


HP LaserJet Pro MFP M426, M427 – Setting up the printer (hardware) (fdn and fdw models)

For software installation instructions, click the link for the computer operating system and type of connection. An adapter for the RJ11 phone cable might be required to connect to the phone jack. To install on Windows XP, log on instwll an administrative user. To test the scanner glass and the copy function, complete the following steps:.

Connect the network cable optional If the printer is to be connected to a network, connect the network cable now. Connect the power cable and turn on the printer. The printer pinter Update the firmware optional but recommended HP regularly updates features that are available in the printer firmware. Select the target deviceand then click Next. The printer copies, and then prints a page.

HP LaserJet Enterprise MFP M725 – Setting up the printer (hardware) (z model)

If you plan to use the printer on a network, save these pages. The following items are listed in the pull-down menu, and you can select the port type you need. Click Start and then Network.


Verify that the printer is turned on. A sturdy work surface, well-ventilated area, and away from direct sunlight.

Take the HP printer out of the box, and then remove the packaging material. From the Home screen on the printer control panel, scroll to and touch the Administration button. Check with the network administrator before updating the printer firmware. Touch instalk Energy Settings item. Follow the steps below to configure the printer port. If the target device is not in the list, click the Search Again button to search the devices using new parameters.

A valid IP address must be assigned to the network interface.

If vaxport IP address is 0. Check the screen on the right and click Close. If the Firewall alert screen appears, click the Unblock button, and then click the Search Again button to search the devices.