Page The JIS standard specifies one track on the front. Be careful to insert the Ribbon away from the Printhead Arm Assembly to avoid damaging the Printhead. If the Film Lamination option is selected, the film lamination is applied to the printed card, then the card is ejected. This control can be helpful for fine-tuning the transfer of overlay onto the card. Fargo Ribbon Standard Black K images.

Uploader: Murr
Date Added: 19 April 2014
File Size: 32.45 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 91984
Price: Free* [*Free Regsitration Required]

This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This should cause the Flipper Table to attempt to home itself.

Enter a valid e-mail address in the associated textbox. If the card is bowing downward, the reverse bending pressure may be too great.

Fargo DTC Direct-to-Card Printer/Encoder – !#$ – Fargo Electronics, Inc.

See Resolving the excessive Resin Printing problems. Check the Printhead for debris and burrs. When loaded properly, the overlaminate material should feed from underneath each roll.

Page – Using the print back side first option Page – Electrojics the print on back side only option Page – Using the rotate front by degrees op Thanks for your feedback, it helps us improve the site.


Page Procedure Select the Submit button. Dtc printhead Good item Verified purchase: The second page of the document will be printed on the front side of the card.

Re-enter the new password in the Root Password Confirm textbox or leave it blank if you want to remove the old password. Press the Resume button to retry.


Complete ID Card Systems. See the procedures in Using the Reboot pages. The Printer will feed, encode and eject a card.

This can be used when the passwords are not known. See the previous page.

The Flipper Table Clutch disengages. Using The Lcd Menu Use the scroll buttons to scroll up or down the list of menu options.

Printer can process the file. Continue to the next section for instructions on installing the Printer Driver.

Do not remove the red Warning sticker across the USB connection. Replace the Printhead after checking incc Printhead Cable connection at both the Printhead and the Main Print Board if the error is still displayed on startup. This item doesn’t belong on this page.


The card is fed out of the Printer. K panel of a full color Print Ribbon. Indicates the contact person string that the User assigns to the Printer. Any input to the Printer on this connection is ignored. For this reason, your Fargo warranty is void, where not prohibited by law, if you use non-Fargo Certified Supplies. Using The Resin Heat k Option front And Back Move the slide to the right to a cause more heat to be used or b cause the resin image to be darker or more saturated.

Extended Warranties electronicx Printhead: The card thickness slide is adjustable to accommodate card thickness variations that often occur even within standard card sizes. Be sure to have high Coercivity cards installed when running this test.

The Print Status screen always displays Cancel in the lower left and Pause in the lower right. Select the Upgrade button to start the Firmware upload.