ADVANSEA AIS RX-100 DRIVER

If after reading this manual you are unsure about any element of the installation process please contact your dealer for advice. The following sections give a brief overview of each item. It’s a community-based project which helps to repair anything. Means of connecting the cables together will also be required. Also included on the CD is the product manual. Compass safe distance 1. Please refer to Figure 6 for guidance.

Uploader: Dilar
Date Added: 27 October 2007
File Size: 67.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15554
Price: Free* [*Free Regsitration Required]

Please ensure all items are present and if any of the items are not present contact your dealer. Thank you for buying this AIS receiver. This equipment must be installed in accordance with the instructions provided in this manual.

Means of connecting the cables together will also be required.

ADVANSEA RX AIS Receiver – £ | PicClick UK

These are similar to class B transceivers, but are designed to be fitted to large vessels such as cargo ships and large passenger vessels. It is strongly recommended that you read all of the instructions in this manual prior to installation.

Antenna cables Alternatively, if you wish to use an existing VHF antenna, antenna splitter products are available which allow the existing antenna to be used with two radio devices, such as a VHF voice rx-1000 and the AIS RX Rd-100 dispose of the packaging in an environmentally friendly manner.

The antenna should not be co-located or operated in conjunction with any other transmitting antenna. Connecting an optional NMEA device Wire colour NMEA function Please note that the ‘Receive’ connections should not be connected to your chart plotter as it is not normal for the receiver to receive data from the chart plotter. The status indicator will illuminate when power is applied to the unit and it is running in normal mode.

  GIGABYTE GA 8LD533 DRIVER DOWNLOAD

The port operates at baud. If your VHF antenna does not use this type of connector please contact your dealer for details of available adaptors. Check that the connections to the chart plotter are correct.

advanSea AIS RX Receiver | Absolute Marine

There are two categories of information transmitted by an AIS transceiver: Class A transceivers transmit at a higher VHF signal power than class B transceivers and therefore can be received by more distant vessels, and also transmit more frequently. Please ensure your NMEA device operates at baud. Before beginning installation of your Advanswa RX, please ensure you have the necessary additional items as detailed in section 3.

The brightness of the indicator will decrease on receipt of AIS messages. Also included on the CD is the product manual. In addition to the items provided with your AIS RX the following items will be required for installation: Similar to class A transceivers in many ways, but are normally lower cost due to the less stringent performance requirements.

Please refer to Figure 6 for guidance. Providing other vessels with AIS transceivers installed are within radio range of your vessel you should see their details appear on your chart plotter or PC. When reading this manual please pay attention to warnings marked with the warning triangle shown on the left.

  FUJITSU 6130Z WINDOWS 7 DRIVER

This equipment must be installed and operated according to the instructions contained in this manual. Please refer to section 4.

If you require longer cables to reach your power supply, please ensure the cables are capable of carrying an average rd-100 of up to mA. VHF antenna Installation 3. The following sections give a brief overview of each item.

Accuracy of this manual Every effort has been made to ensure the packaging for this product is recyclable. The NMEA data port provides the connection to your chart plotter and consists of four wires colour coded as shown in the table below and in Figure 8.

Advansea AIS RX-100

R-100 the red wire to the power supply positive terminal. If after reading this manual you are unsure about any element of the installation process please contact your dealer for advice. You may also need to enable the display of AIS targets in the chart options. It’s a community-based project which helps to repair anything.